Clamping tools
We from W&F have been manufacturing tool holders for CNC-controlled machines for more than 25 years.
In addition to the standard program, W&F also offers tool holders in up to five different lengths. Customer-specific solutions are also one of the strengths of W&F.
Collet chucks
Typ ER 8° to hold tools with parallel shank in collets DIN 6499
Typ 1:10 to hold tools with parallel shank in collets DIN 6388
HSK50 - DIN ISO 12164 A+C
HSK63 - DIN ISO 12164 A+C
HSK100 - DIN ISO 12164 A+C
SK40 - DIN 69871 AB / B
SK 50 - DIN 69871 AB / B
SK 40 - DIN 2080
SK 50 - DIN 2080
MAS BT40
MAS BT50
You will find more products and information in our catalogues.
End mill holder DIN 6359
Weldon: For clamping tools with parallel shank DIN 1835 Form B
Whistle Notch: For clamping tools with parallel shank DIN 1835 Form E
HSK50 - DIN ISO 12164 A+C
HSK63 - DIN ISO 12164 A+C
HSK100 - DIN ISO 12164 A+C
SK 40 - DIN 69871 AB / B
SK 50 - DIN 69871 AB / B
SK 40 - DIN 2080
SK 50 - DIN 2080
MAS BT40
MAS BT50
You will find more products and information in our catalogues.
End mill holder DIN 6359 W&F-Line
Weldon: For clamping tools with parallel shank 1835 Form B
Advantages:
- The total center of gravity of the tool shank is in ideal position to the machine spindle suspension
- Mounting form is extremely lean
- High rigidity because of the parable form
- Weight is reduced
Applications:
- Circulate milling
- Thread milling
- Drilling
- Reaming
- Countersinking
HSK63 - DIN ISO 12164 A+C
HSK100 - DIN ISO 12164 A+C
SK 40 - DIN 69871 AB / B
SK 50 - DIN 69871 AB / B
You will find more information in our catalogue.
Shrink fit chucks
- Form A HSK for automatic tool change to ISO 12164 with gripper groove
- Form C HSK for manual tool change to ISO 12164 without gripper groove
- Form E HSK for higher spindle speeds (HSC) ISO 12164 with gripper groove
balanced G2.5 - 15.000 U/min
(DIN ISO 12164 E G2.5 - 30.000 U/min)
HSK40 - DIN ISO 12164 A+C
HSK40 - DIN ISO 12164 E
HSK50 - DIN ISO 12164 A+C
HSK50 - DIN ISO 12164 E
HSK63 - DIN ISO 12164 A+C
HSK100 - DIN ISO 12164 A+C
SK40 - DIN 69871 AB / B
SK 50 - DIN 69871 AB / B
MAS BT40
MAS BT50
You will find more products and information in our catalogues.
For milling cutters with longitudinal or transverse drive (for cutters with tenon or clutch drive)
Milling machine arbors DIN6357
For milling cutters with key drive
HSK50 - DIN ISO 12164 A+C
HSK63 - DIN ISO 12164 A+C
HSK100 - DIN ISO 12164 A+C
SK40 - DIN 69871 AB / B
SK 50 - DIN 69871 AB / B
SK 40 - DIN 2080
SK 50 - DIN 2080
MAS BT40
MAS BT50
You will find more products and information in our catalogues.
Adaptor sleeves DIN 6364
For morse taper shanks with draw thread DIN228A
Holding arbors
To take milling cutters
Reduction arbors
To hold taper holders DIN 2080/DIN 69871 – MAS BT
Master shanks
To hold tools with shank DIN 6327
Boring bar-blanks
For making special tools
Tapping head quick-change
With lenght compensation in compression and tension
You will find more products and information in our catalogues.